Browse Products
 Products
Diesel Engine Product Range
Industrial Diesel Engines
Marine Propulsion Engines
SOFIM HPI Engines
VECTOR Engines
Industrial Generator Sets
Marine Generator Sets
Engines for Generator Sets
Custom Built and Installed Units
 
 
 MasterCard American Express Card Visa Card
Call maesco.com today!
 Tel:
(800) 257-8133
(856) 829-7798
 Fax:
(800) 470-4779
(856) 829-2776
 email maesco.com
 
Email this web site to a friend! 

 VECTOR Engines

 


VECTOR engines have a stabilized cast iron monolithic engine block with wet cylinder liners. Singular cast iron cylinder heads with high turbulence induction lines. Eutectic aluminum alloy pistons, with toroidal cooling tunnel and omega shaped combustion chamber. High strength steel drive shaft with counterweights and front/rear balancing flywheels. Ability to configure water, oil, and combustion air cooling circuits in many different ways. Forced lubrication with engine cooling liquid heat exchanger. Timing system with 4 valve per cylinder controlled by rods with long life roller tappets and rocker arms. Single camshaft at the center of the engine block, driven by helical gears. Supercharged with intercoller. Turbochargers controlled by waste gate. Common rail injection with total electronic control.

 

 

Specifications:

 

Model Number

Vector 15

Vector 20

Vector 30

Vector 40

 Cylinders 

6

8

12

16

 Displacement cm3

15060

20080

30120

40160

 Bore x Stroke mm

145 x 152

 Idle Speed rpm

600

 Power (1)  kW @ rpm

540 @ 2100

720 @ 2100

1080 @ 2100

1440 @ 2100

 Torque Nm @ rpm

2800 @ 1200

3700 @ 1200

5600 @ 1200

7400 @ 1200

 Operating Noise (2)  dB(A)

<97

 Fuel Consumption (3) g/kWh

195

 Length (4) mm

1185

1375

1755

2150

 Width  mm

1400

 Overall Height (5)  mm

860

 Weight (6)  kg

1100

1450

2200

2900

 Front PTO Nm

400 x 2

 Rear PTO  Nm

800 @ 800

1100 @ 800

1650 @ 800

2200 @ 800

 Certifications

EURO 3 - CE 97/68 Phase 2 - EPA Tier 2

 Working Life (BEIO l.f. 60%)  h

10000

(1) Maximum value, compliant with suitable certifications and with Directive CE 97/68 (without fan), after 50 hours of operation, tolerance 3%. Test conditions ISO 3046/1: atmospheric pressure 100kPa, T 25 degrees C, relative humidity 30%, as per DIN 6271 - BS 5514 SAE J 1349 Standards.
(2) Meets the ISO 3744 standard, at maximum power.
(3) Best point.
(4) Maximum value.
(5) Minimum with low profile sump.
(6) Without liquids, standard configuration.