Item

Part No.

Description

1

RK22425

Beige Mounting Head,3/8”-18 NPTF (400’s)

RK22168

Beige Mounting Head,3/4”-16 SAE (4120)

RK22168-05

Mounting Head,16mm x 1.5 metric ports

2

RK10110

Vent Plug (metal), 3/8”-24 SAE

3

RK22201

By-Pass Valve (not shown)

4

R45S

445 Service Element, 2 micron

R45T

445 Service Element, 10 micron

R45P

445 Service Element, 30 micron

R60S

460 Service Element, 2 micron

R60T

460 Service Element, 10 micron

R60P

460 Service Element, 30 micron

R90S

490 Service Element, 2 micron

R90T

490 Service Element, 10 micron

R90P

490 Service Element, 30 micron

R120S

4120 Service Element, 2 micron

R120T

4120 Service Element, 10 micron

R120P

4120 Service Element, 30 micron

5

RK22333

Bowl Bevel-cut Gasket (#22333)

6

RK20126

Water Probe Port Plug (1/2”SAE)

7

RK30964 (1)

Water Probe (1/2”SAE) & Connector

8

RK22323

Heater Connector

9

RK30476

Bowl Self-venting Drain Valve Assembly

10

RK21113-13- 11

Bowl w/ Drain & Wtr. Probe Port Plug (1/2”SAE)

RK22616-01 (2)

Same as above but with 12vdc Heater & Probe

RK22616-02 (2)

Same as above but with 24vdc Heater & Probe

22209

Installation Instructions, 400 Series

Model 4120R Bowl Parts

11

30965

Bowl Gasket (formerly O-ring #30062)

12

RK20126

Water Probe Port Plug (1/2”SAE)

13

RK30964 (1)

Water Probe (1/2”SAE) & Connector

14

RK30876

Heater 2-pole Connector Kit

15

RK30476

Bowl Self-venting Drain Valve Assembly

RK30058

Drain Valve w/ Seals (not shown)

16

RK30063

Bowl w/ Drain & Probe Port Plug (1/2”SAE)

RK30900 (2)

Same as above but with 12vdc Heater

RK30925 (2)

Same as above but with 24vdc Heater

(1) Water probe must be used with a Water Detection Kit. Note: Check threads before ordering. Two different sizes were available on bowl designs prior to May,1997.
(2) In-bowl heater may require a Heater Relay Kit. Power requirements (maximum) are: 12vdc=16.6amps, 24vdc=8.3amps.
See Accessories Section.